Yes Vince, you are quite correct. 

  Neil 


vmckever wrote:
> 
> Neil, The mileage did not vary by much but it was very far and 
> always late at night. 
>  N6OA/2
> ----- Original Message -----
> From: "Neil McKie" <[EMAIL PROTECTED]>
> To: <[email protected]>
> Sent: Wednesday, March 16, 2005 9:25 PM
> Subject: Re: [Repeater-Builder] GE MVP mobile tuning slugs
> 
> >
> >
> >  Back in the 'earlier days of radio' ... that's the Motorola T44A6A
> > Receiver for those of you who were around back then and can still
> > appreciate those days ...
> >
> >  We removed the stuck slugs by using drill bits ... hand inserted
> > into each slug and carefully reaming out the center.  Once that
> > drill bit cleared the stuck slug, we used the next size larger
> > drill bit ... until the remaining parts collapsed and fell out.
> >
> >  Just our successful method.
> >
> >  Batteries not included / your mileage may vary.
> >
> >  Hope this helps,
> >
> >  Neil - WA6KLA
> >
> >
> > Larry Lockard wrote:
> >>
> >> Sorry all .... Should have said it was a mobile...I forgot GE was dumb
> >> enough to give the same designation to different types of radios.
> >>
> >> Also the 4 slugs are not only stripped but if like the others on the
> >> board
> >> that I did get loose these will be stuck ....  tight. Pointers before I
> >> replace them gladly accepted.
> >>
> >> I would consider buying a whole radio depending on the price or just
> >> another
> >> exciter board or if someone has a spare.... GE Custom MVP UHF Mobile -
> >> board
> >> needs to be capable of moving to 444 mhz area of the ham band (no tripler
> >> please). As I say I'm going to duplex it and I've told to avoid the
> >> tripler
> >> versions.
> >>
> >> Thanks
> >> Larry
> >>





 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Repeater-Builder/

<*> To unsubscribe from this group, send an email to:
    [EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 



Reply via email to