--- In [email protected], Eric Lemmon <[EMAIL PROTECTED]> wrote:
  It also makes a big difference if your receiver has a helical
> resonator filter in the front end or not. 

Eric, I'm not disputing the statement above, just want to learn.  

Looking at the specs on a Mastr II base station receiver, I note that
the Maximum Frequency Separation for the 150.8-174mc version for full
specifications is 1.0mc.  I read that also as +or- 500kc.  The 3db
Degradation Separation is 1.8mc.  So if I'm thinking right here the
response of this receiver at +or- 600kc is only down maybe 1db or so.
 I don't see this receiver rejecting much energy at all at the TX
frequency.  99% of needed isolation is provided by the duplexer.  So
why is a helical front end such a big advantage for a repeater
receiver?   

Laryn K8TVZ







 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Repeater-Builder/

<*> To unsubscribe from this group, send an email to:
    [EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 



Reply via email to