----- Original Message -----
From: "Kevin Custer" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Monday, March 21, 2005 8:48 PM
Subject: Re: [Repeater-Builder] Desense im guessing?
>
> Brent wrote:
>
> >Kevin
> >Thanks I just look back at the meter and I stated 20Watts it was NOT it
was 5
> >watts. with over 5 watts it causes the desense Problem..
> >
>
> Cutting the power can be a double edged sword. While it reduces the
> shear power level, cutting the power down too far in Class C
> amplification can cause spurious emissions. The end result is cutting
> down the power many not be very beneficial, in fact, it *might* make
> matter worse.
>
> >I would think that since this is a PLL exciter and im am only needing
15-25
> >watts out that it should do ok ..
> >
>
> What is the power amplifier capable of? 110 watts?
**** Yes, 110watts
>
> >what would your thoughts be about adding 2 10" pass cav. to the receiver
> >side.. and or should i go with out the preamp.
> >
>
> First thing I'd do is bypass the preamp and see if you can get the thing
> to duplex. Then, start adding your bells and whistles.
****Ok I have just done that and yes desense is gone, it hears but not as
well.
>
> Kevin
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
> ---
> [This E-mail scanned for viruses at TNWEB LLC]
>
>
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Anti-Virus.
> Version: 7.0.308 / Virus Database: 266.7.4 - Release Date: 3/18/2005
>
>
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.7.4 - Release Date: 3/18/2005
---
[This E-mail scanned for viruses at TNWEB LLC]
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
