Just pick up a Micor or MASTR II. With the front end of those tuned to 162 MHz (or even 152 MHz) it will never see your 2M repeater. Or, use a set a front end out of one. For a real sweet WX radio, just interface a standard alert RX SAME decoder to the MASTR II or Micor and crystal it up for your local WX channel.
Joe M. KA9QJG wrote: > > I forgot to add If you have a 2 Meter repeater and try and re broadcast the > NWS, Or happen to be using Your 2 Meter Equipment at the same time, I found > out that in My case it would desense the NWS Signal so bad I did not get the > end of Message signal, to shut things off, So I got a Custom made filter for > 162.425, And I can run 100 watts on 2 Meters with Mt Kenwood TS-2000 with no > desense at all This is where I got he Filter and Delivered Fast too > http://www.parelectronics.com/amateur.htm > > Don KA9QJG > 444.750/R > > > Yahoo! Groups Links > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
