I cut the SO-239's off, reused the hood and replaced them with 'N' Panel Receptacle (UG-58/U) for UHF M2 rptr. So far so good!
Roger Hansen, W6TOZ
-----Original Message-----
From: Tedd Doda <[EMAIL PROTECTED]>
To: [email protected] <[email protected]>
Sent: Tue, 05 Apr 2005 09:02:00 -0400 (EDT)
Subject: Re: [Repeater-Builder] Andrew Heliax LDF1-50
On Tue, 05 Apr 2005 08:00:36 -0400, Glenn Little WB4UIV wrote:
>it is just a very poor choice for a connector.
Has anyone come up with a plan to replace the SO-239 hooded
chassis mounts on the Mastr II repeaters? We've got 5 in
service, both VHF and UHF, and all use the dreaded SO-239
for both RX and TX.
Tedd Doda, VE3TJD
Lazer Audio and Electronics
Baden, Ontario, Canada
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Yahoo! Groups Links
- To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
- To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
- Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
