Yes, I am very sure, it receives good one minute then drops outs, and comes back, this is without it even being hooked to the repeater. I had it do this to me once before, I must have moved something inside, it started working again. I went over all the solder joints but still does the same thing. Another funny thing, is the unit has had low audio since I got it, crank it all the way up and just able to hear it, last week it took off and had full volume, but then left again, and never came back.
Other's asked, this is the VHF unit. Hoping to find another one so I can use the same xtal, rather than buy a new xtal. Thanks. Mathew -----Original Message----- From: Q [mailto:[EMAIL PROTECTED] Sent: Wednesday, April 06, 2005 9:54 PM To: [email protected] Subject: Re: [Repeater-Builder] WTB: GE Mastr Pro ER41A10 Receiver Are you sure its the receiver??? w9mwq wrote: >Anyone got one of these receivers lying around taking up space, I >could use one. I have an intermittant problem with mine that I cannot >find. Receive goes deaf then comes back. Thought it was some bad >solder joints, that did not cure it. It goes from -120 dB to -80 dB. >Then it begins to desence when this happens. If you have something, >please let me know. Thanks. > >Mathew > > > > > > > > > > > > Yahoo! Groups Links Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
