I have been told that Wacom was sold by Remec to TXRX on 11/2/2001.
wa2vnv said: > > > Eric, tnx for the reply. What year is your catalog, and is Wacom > still in business? I am looking for more specific info (insertion > loss, reject loss, etc) about tuning and setting the offset. It does > not seem to have any way to set the offset without opening up the > cans. > 73's, George WA2VNV > > --- In [email protected], Eric Lemmon <[EMAIL PROTECTED]> > wrote: >> George, >> >> My WACOM catalog lists the WP-698 as a BpBr duplexer for the 1.270- > 1.295 >> GHz band., with a 12 MHz minimum spacing. There is no further info. >> Since it is a BpBr device, I should think that the main tuning rod > sets >> the pass, while the trimmer sets the notch. >> >> 73, Eric Lemmon WB6FLY >> >> wa2vnv wrote: >> >> > Hi all - I'm looking for specs and tuning information on a Wacom >> > WP-698 >> > duplexer. It's a 4 can unit, 2 for Tx, 2 for Rx. Single screw for >> > tuning. What sets the spacing for Pass & Reject. 20 or 12 MHz >> > spacing? >> > Tried the usual searches but don't find any specifics for this > model. >> > Anyone out there got some info? Thanks. >> > George > > > > > > > > > > Yahoo! Groups Links > > > > > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
