---Additionally: Model: UUST Serial 1138 input 75-9-49output
Model 105ss no serial# input9-43output
In [email protected], Glenn Little WB4UIV
<[EMAIL PROTECTED]> wrote:
> These sound like CATV equipment where they received one channel and
> translated it to another.
>
> Since these appear to be UHF out, there would be little that could
be use
> on 6 meters.
>
> If you has something that was channel 2 in, you would have
circuitry that
> could be made to tune 6 meters for receive.
>
> However the translator is at least 6 MHz wide and the signal that
you need
> is only 5 KHz or so wide.
>
> You might be able to salvage some oscillators or tuned circuits for
> building blocks if you had the knowledge and experience to use
them. You
> could also salvage a lot of transistors and passive components for
> projects. Ther might be some double balanced mixers that you could
use.
>
> There are probably some power supplies that you could use.
>
> Keep in mind that most TV equipment is 75 Ohms in and out, where
the
> communications stuff is 50 Ohms.
>
> As far as using any of the assemblies as is, not probable.
>
> 73
> Glenn
> WB4UIV
> Engineering Tech WTAT/WMMP TV.
>
>
> At 08:30 PM 04/28/05, you wrote:
> >---The only thing I can find on the radio's are: TTC UHF TV
Translator,
> >ch4 serial 242 650-810mhz/and on another input9-43out
> >I know nothing about these,
> >
> > In [email protected], DCFluX <[EMAIL PROTECTED]> wrote:
> > > What Model/Make are they?
> > >
> > > On 4/27/05, kb9zes <[EMAIL PROTECTED]> wrote:
> > > >
> > > >
> > > > I have 3 old TV-translators. Cabinets are 6ft tall. Does
anyone
> >know if
> > > > I could convert any of these parts into one, to build a 6m
> >repeater? Or
> > > > if anyone else has a need for the translators for parts?
> > > >
> > > >
> > > > Yahoo! Groups Links
> > > >
> > > >
> > > >
> > > >
> > > >
> >
> >
> >
> >
> >
> >
> >
> >
> >Yahoo! Groups Links
> >
> >
> >
> >
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
