Brent your master 2 is Uhf or Vhf ? 73/s to all here at the group!
gervais,ve2ckn >From: "Coy Hilton" <[EMAIL PROTECTED]> >Reply-To: Repeater-Builder@yahoogroups.com >To: Repeater-Builder@yahoogroups.com >Subject: [Repeater-Builder] Re: system board GE MASTR II >Date: Sun, 08 May 2005 02:05:42 -0000 > >Okay let me see if I have it. What you have is an exciter and a PA >(A transmitter only). A receiver from another base or mobile. No >system board. Okay, If you can't find a replacment receiver system >board, let me know, I'll help you with a work around. At least you >have the 10 V regulator in the shelf. > >What you will need are molex connectors and pins. They can be had >from Newark Electronics. I have bought the board mounted connectors >like the system baords have (you really won't need these) and the >regulator ones for connecting to the receiver boards there. >Good Luck >73 >AC0Y > >--- In Repeater-Builder@yahoogroups.com, "Brent" <[EMAIL PROTECTED]> wrote: > > well I have acquired another Ge Repeater with out the receiver, >and I have a > > receiver but the repeater I acquired no only was missing just the >receiver > > but the actual whole tray, the complete fold out osc, sq/audio >board and > > system board.. > > Oh no, no bad 10v reg card .. the control shelf is in tack and >great > > condition.. just need the system board that the receiver and the >rest of > > the cables connect to. > > thanks Coy > > ----- Original Message ----- > > From: "Coy Hilton" <[EMAIL PROTECTED]> > > To: <Repeater-Builder@yahoogroups.com> > > Sent: Saturday, May 07, 2005 8:15 PM > > Subject: [Repeater-Builder] Re: system board GE MASTR II > > > > > > > Are you building a radio or, do you have a bad 10 Volt regulator? > > > There are work arounds if you can't find one. > > > Good luck Bret > > > > > > --- In Repeater-Builder@yahoogroups.com, "Brent" <[EMAIL PROTECTED]> >wrote: > > > > Anybody know where I can locate a system board for a Ge Mastr >II > > > repeater > > > > I think the numbers are as follows 19D417205P1 Rev 3 > > > > > > > > > > > > Thanks > > > > Brent > > > > > > > > > > > > > > > > --- > > > > [This E-mail scanned for viruses at TNWEB LLC] > > > > > > > > > > > > > > > > > > > > > > > > Yahoo! Groups Links > > > > > > > > > > > > > > > > > > > > > --- > > > [This E-mail scanned for viruses at TNWEB LLC] > > > > > > > > > > > > > > > --- > > [This E-mail scanned for viruses at TNWEB LLC] > > > > > > > >Yahoo! Groups Links > > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/