KiloHertz is the correct term!

Richard, N7TGB


-----Original Message-----
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of DCFluX
Sent: Saturday, May 21, 2005 7:17 PM
To: Repeater-Builder@yahoogroups.com
Subject: Re: RE : Re: [Repeater-Builder] Poor Repeater RX


Don't you mean, kiloCycles?

On 5/21/05, Kevin K. Custer <[EMAIL PROTECTED]> wrote:
>
>
>
> >------- Original Message -------
> >From : Eric Lemmon[mailto:[EMAIL PROTECTED]
> >Sent : 5/21/2005 4:05:15 PM
> >To : Repeater-Builder@yahoogroups.com
> >Cc :
> >Subject : RE : Re: [Repeater-Builder] Poor Repeater RX
> >
>  >Alexander,
> >
> >The
> >Sinclair Q-202G duplexer can barely make 85 dB when tuned on a network
> >analyzer, so that's the major part of your desense problem. It's only a
> >four-cavity duplexer, specified at 80 dB minimum isolation, so no amount
> >of tuning is going to make it operate at an isolation above its design
> >limit.
>
>  While I don't disagree with what has been written, please realize that
> *most* commercial manufacturers 'rate' their highband/2M duplexer at 500
> kiloHertz split, not 600 kiloHertz where most amateur 2 meter repeaters
are
> operated.  This added frequency separation allows for the duplexer to
> provide more than the stated isolation at the 500 kiloHertz specification.
>
>  The Wacom WP-641 is specified at 85 dB of isolation at a 500 kiloHertz
> split, but provides 93 dB of isolation at 600 kiloHertz.  The Sinclair
Q202G
> is similar in its factory specifications, and isolation provided.
>
>  Kevin Custer
>
>
>
>
>
>
>
>  ________________________________
>  Yahoo! Groups Links
>
>
> To visit your group on the web, go to:
> http://groups.yahoo.com/group/Repeater-Builder/
>
> To unsubscribe from this group, send an email to:
> [EMAIL PROTECTED]
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.





Yahoo! Groups Links
















 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Repeater-Builder/

<*> To unsubscribe from this group, send an email to:
    [EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 


Reply via email to