The pin is TOR or tone on receive. (pin-24) ----- Original Message ----- From: "Ken Arck" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Thursday, June 09, 2005 12:09 AM Subject: Re: [Repeater-Builder] TKR-850 PL on COS
> At 08:44 PM 6/8/2005 -0700, you wrote: > > Look in the software :optional features,AUX inputs; there is Aux In pins > that you program diferent actions, program one for QT/DQT encode > enable/disable and control it with one of the output lines of the RLC-3 > > <---Sorry but that won't work. Kenwood's CTCSS is done in DSP and, even in > Version 2 repeaters, you cannot change the encode status while the > transmitter is active. In other words, you can allow or disallow encode > only at the beginning of that transmission. > > Kinda sucks actually... the way around this is to use an external encoder > and not to program any CTCSS (QT) encode within the Kenwood at all. Then > you can feed the external encoder's output into pin 8 (the Tx Data input) > of the DB25 on the back. You can then control that external decoder with > whatever... > > Ken > > -------------------------------------------------------------------------- ---- > President and CTO - Arcom Communications > Makers of state-of-the-art repeater controllers and accessories. > http://www.ah6le.net/arcom/index.html > It was great to meet many of you at Dayton 2005! > We offer complete Kenwood TKR repeater packages! > AH6LE/R - IRLP Node 3000 > http://www.irlp.net > > > > > > Yahoo! Groups Links > > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
