Some one must be able to as one of my Kenwood TKR 850's is being used with
Echolink and it does not transmit a QT tone when the input of a user is
removed so as not to pass a voice ID or beeps into the Echo link. we also do
not hear any of the ID's at home with the tone receive on at home. Sorry to
alert you all but Dean set this up for us and it works and has for well over
a year now. We can also control the tone on and off via the controller for
transmit
Russ,
.
----- Original Message -----
From: "skipp025" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Thursday, June 09, 2005 12:05 PM
Subject: [Repeater-Builder] Re: TKR-850 PL on COS
> If there was enough demand for said function, I can
> and would pass it on to the software guys back at
> Kenwood. They do pay attention to valid feedback.
>
> skipp
> skipp025 at yahoo.com
> www.radiowrench.com
>
> > Ken Arck <[EMAIL PROTECTED]> wrote:
> > At 07:21 AM 6/9/2005 -0400, you wrote:
> >
> > >The pin is TOR or tone on receive. (pin-24)
> >
> > <----That depends on which Aux Output you program
> > to be TOR. But that still doesn't change the fact
> > that you can't control encoded tone once the
> > transmitter has come up. Sorry but not even Dean
> > can change that :-)
> > Ken
> >
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
