>
>One trick I saw done was to take a male-to-make adapter and a
>female-to-female adapter and screw them together.
>Put this set on the end of the each of the existing too-short
>harness segments, and try the tuning. It may be enough.
>If not, put another set on the other end of each cable. A bunch of
>adapters is something you can try before you
>order a new harness.
I've always wondered about this, especially at VHF/UHF, how exactly
you interpret when someone says you need an 11" cable, or a 1/4 wave
cable, do you measure from the tips of the connectors, or where?
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
