I know I should have this figured out by now, but fact is, I'm still
stuck. Ok, I hit a brick wall that someone put in front of me on my
TM-V7's using them for the remote receivers at the repeater site, and
that is only one side will produce the 5 volts on the packet
connection. So I would be good for one half of the radio. So lets
just say for sake there was no 5 volts there, and I have discriminator
audio, how would a COS or Squelch circuit be brought into action that
will give me my 5 volts. I take the discriminator audio to the RVS-8
controller, what hooks to the COS circuit. I'm basically drawing
blanks on how this works.
Mathew
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
