Fred Seamans wrote:
> I agree with the other comments that 62 to 100 watts output will not make
> that much difference. From your description if the handhelds power output of
> ?(2 to 5 watts), is making it into the repeater receiver at full saturation
> and 62 watts out of the duplexer is not making it into the handhelds
> receiver, you have a noise problem at the steel mill! With all the
> electrical equipment at the mill, there is plenty of noise all over the
> spectrum. 1 to 2 db increase will not cure this problem.
> Fred
> W5VAY
Good point! Steel mills are notorious for noise generation, between all
the equipment involved and I think there is some noise generated by the
hot metal when it's moved/poured/whatever. And again, it will be worse
at 2M then at 220.
--
Jim Barbour
WD8CHL
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
