--- In [email protected], "skipp025" <[EMAIL PROTECTED]>
wrote:
"There are a number of initial items, which need to be properly set up
the first time with the S-Comm 7K & Vyex 7K DAB..."
_____________________________________________________________________
This 7K came with the DAB and firmware all factory installed.
I started by editing the config.ini file on the memory card to set the
baud rate to 9600. I am using an old DOS computer running Procom.
Everything works perfectly ONCE. I can send commands to the 7K all
day long, program any parameter, make it talk or send tones & ID, turn
on I/O bits - do anything and everything with never a hint of a
glitch, but after powering off the 7K it won't accept any commands at
all.
I conclude this is a firmware bug so I'll just have to get it right
the first time [like the old piano tuner...]
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
