At 10:16 AM 7/8/2005, Mathew Quaife wrote:
>Well I just did a quick tweak on the tx duplexer, with 5 watts in I
>get three watts out, but then put the 140 watts in and still only
>get 75 watts out of the duplexer. Why would it change with higher
>power levels? I had asked that question once before about the 3
>cans in the tx side and was told to leave it alone. Can a system be
>ran with 3 cans in the RX and only 2 in the TX side, or would this
>throw things off.
>
This tells me that a few watts coming out of the amp are not within
the passband of the cans.
The systems I work with around here are 2 and 2, but this all depends
on your area, and your gear.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
