TM-241 a were not designed as a repeater use reciever or has the
capability to hold XMIT until the RF Module SAV 217 or was it SAV 218
?? takes a dive, no fan BTW only good for 5 watt packet radio or sell to
a newbie ham .
Mark AB8RRU
Paul Kelley wrote:
>I am wanting to temporarily use a Kenwood TM-241A radio at a
>repeater site... not for a repeater receiver but for
>something fairly "mission critical". I fed the audio
>output available at the mic connector to a TS-32P and it
>seemed to decode fine at first. I have now found it
>decodes signals from some radios and not from others. Not
>sure if the audio level is borderline (too low) or if the
>audio from that point may be after a high pass filter in
>the radio or what??? Any hints? I am on my way back to
>the site to mess with it some more but will check back with
>email in a couple of hours.
>
>Paul, N1BUG
>
>
>
>
>
>
>Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
