HELLO ALL
I need a little help on a project, we have 2 Uhf Ritron repeaters, one is 2.5 watt (461.2125) and #2 is about 6 watts (461.4125) and one yeasu 25 watt 464.4625. The 2.5 watt has degraded over the years (15 year old repeater) I can not convince the supervisor that there is a problem with the repeater (drifting slightly off freq and intermod from the co located repeaters). Anyway these are in close quarters within 3 feet of each other on the wall and the antennas are within a 25 foot radius of each other. I am planning to use 2 maxtracs, a rick box, and a cellwave flat pack (mobile duplexer) as a replacement for the ritron 2.5 watt radio to show them that the repeater needs replacement.
Now with the .4125 6- watt ritron repeater using the same pl tone 200 khz away from where I will place the maxtrac repeater dose anyone see any intermod, front end overload, or signal rejection problems that the maxtrac's ?
thanks .....bob
YAHOO! GROUPS LINKS
- Visit your group "Repeater-Builder" on the web.
- To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
- Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
