Hi All,
We have run into a problem with some local interference getting into one of
our link radios.
It is believed to be coming from one of the TV home transmitters, that one
can buy from the local appliance shops.
It is producing a signal right on teh input of our link. I have put an extra
filter in line, but this did not fix it.
I really do not want to do through the hassel of trying to get another set
of freqencies at this stage.
Shoudl add that when the RX is receiving a signal from the TX link, it
overrides the interference nicely. The interference is just enough to open
the squelch.
Have thought about putting either CTCSS, or a newer DCS TX/RX boards in the
link system.
I have read somewhere that DCS is the better way to go. If this is the case,
where is the best place to purchase boards to fit inside our radios. We are
using Tait T345 and T346 gear.
Any information will help point us in the right direction.
Regards
Kevin, ZL1KFM.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
