Johnny,

What constitutes the loss of the FCC type acceptance?  Does anyone have the
rules section pertaining to this question?  Like I said, the worst thing you
do to some of these radios is removal of the antenna switch which has caused
some interference problems with near field transmitters.

Paul


-----Original Message-----
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] Behalf Of Johnny
Sent: Monday, November 28, 2005 6:44 PM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Re: GMRS in USA


No, it does not.
Johnny


Neil McKie wrote:
>   Question:
>
>   Does the Johnson 6060 meet FCC Type Acceptance for GMRS?
>
>   Neil - WA6KLA
>
> Mike Morris wrote:
>
>>At 06:57 AM 11/28/05, you wrote:
>>
>>
>>> Interesting.  I have a friend who was just asking me about a
>>>GMRS repeater for he and his wife.  He has aprox. 50 acres of
>>>woods that he likes to walk around in and is in his 70's.  His
>>>wife is concerned about him needing to contact her, so I got
>>>them a pair of Midland GMRS radios.  They don't quite do the
>>>job because of a little terrain blockage due to a hill.  I was
>>>thinking of recrystalling a Repco repeater that I have and set
>>>up a GMRS repeater, but don't know the details about how
>>>feasible this would be.  Any suggestions from the group?
>>>
>>>Joe
>>
>>Reminds me of a small repeater I saw a dozen years ago.  A regular
>>outhouse building, but with no throne, off in the woods, but on the
>>crest of a small hill.  Inside was a pair of car batteries,  a
>>Johnson UHF PPL 6060 radio and a mobile duplexer. On the roof was
>>a 2 foot by 4 foot solar panel facing south.  Next to the building
>>and strapped to it was a 30 foot pushup mast holding a short
>>stationmaster.
>>
>>Taped to the Johnson was a xerox of a GMRS license.
>>
>>There is a GMRS conversion of a 6060 at repeater-builder.
>>
>>Mike WA6ILQ
>>
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>






Yahoo! Groups Links














 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Repeater-Builder/

<*> To unsubscribe from this group, send an email to:
    [EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 


Reply via email to