That would be ok ... until some user came on with the wrong tone. We had a controller of that type some 20 years ... had to modify that when users started to use a CTCSS tone on their transmitters.
On occasion, we found the repeater was turned off - so we turned it back on. After the modification we had installed, that problem went away. Neil XE2SI wrote: > > How about using a subaudible tone "PL" decoder to activate a flip-flop > circuit > that switch on-off the PTT line?? > > Juan XE2SI > > -----Original Message----- > From: [email protected] > [mailto:[EMAIL PROTECTED] On Behalf Of chris_inos > Sent: martes, 29 de noviembre de 2005 18:21 > To: [email protected] > Subject: [Repeater-Builder] repeater..activate without tones > > can one remotely activate a repeater without tones? > Say: click PTT three times within 3 seconds and repeater is up. > click PTT four times within 3 seconda dn repeater is down > > thanks > csi > > > Yahoo! Groups Links > > > > > Yahoo! Groups Links > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
