I've posted this a few times...
**IF** loss on the incoming signal(s) isn't an issue ...
1/2-wave (or multiple thereof) jumpers, daisy-chained
between "T"s.
[rx.ant-coax] ->>- [T-(rx)] -jumper- [T-(rx)] -jumper- [last
rx]
Our RXs did not exhibit problematic interactions -- used
RG58 & PL259s.
Our common antenna: 1/2-w dipole:
( 2ea x 6" x #18 solid - soldered to a SO239 chassis
connector)
Seems to play nicely. YMMV.
~/ N8BQN /~
> Vincent Caruso wrote:
> That sounds like an interesting solution, I would be
interested in learning more about it.
> Ralph Hogan wrote:
> Along these lines, someone on the list mentioned using
coax multi-dropped
> (coax tee) off to each receiver for a voter application.
Can't find the
> original posting. I was curious about the lengths required
between the
> antenna and then to each radio?
> Ralph W4XE
====================
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
