> "tony dinkel" <[EMAIL PROTECTED]> wrote:
> I have been pulling my hair out (I don't have that
> much more to go) over an old Celwave 6 cavity 526-4
> pass reject duplexer. I can get the notches to
> tune properly one by one but when I put it all back
> together it just does not seem to sum out right. Is
> there a procedure someone can point me to?
The single vs series adjustments will be different.
It would be a pain in the fanny to make the adjustment
without a spectrum analyzer with a tracking generator.
I tune each cavity, then sum the cavities and readjust
the notches, which move quite a bit from the original
single cavity position.
Once you get the notches in line... firmly secure the
notch position adjustment screws and threaten people
with early demise should they touch them again.
cheers,
skipp
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
