Skipp, The i20R is nothing more than a no-frills 10-user community tone panel. It works as advertised, except that it neither generates nor responds to reverse burst squelch-tail elimination phase shifts, which the single-user R1225 controller does well. Neither it nor the R1225 built-in controller has telephone interconnect.
73, Eric Lemmon WB6FLY -----Original Message----- From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of skipp025 Sent: Sunday, December 25, 2005 8:10 PM To: [email protected] Subject: [Repeater-Builder] Re: R-1225 The I20R acts like a community repeater tone panel. The I50R adds telephone interconnect. I like the pretty led lights flashing on the I20R when you program it... I haven't had to mess around with the internal R1225 controller much... does it do multiple user community repeater tone panel type operation very well? I don't believe it has telephone interconnect? skipp ps: the manual for the I50R is on my sonic web page. > "Eric Lemmon" <[EMAIL PROTECTED]> wrote: > Chris, > I have several R1225 repeaters in service, both VHF and UHF. I tried > using one of them with an i20R controller, but I found that the loss > of the reverse burst STE to be unacceptable. > So, all of them are now running with > the built-in controller and doing just fine. > > I'm curious: Why would you want to connect an external controller, > when there's one already inside the radio? > 73, Eric Lemmon WB6FLY > Yahoo! Groups Links Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
