At 05:41 AM 12/28/05, you wrote:

>I am hoping to find someone with a 192.8 Hz reed for a 70's vintage
>Moto radio.
>
>I don't usually work with Moto gear, but this deal was way too good to
>pass on.
>
>Any assistance/suggestions/advice will be greatly appreciated from
>folks more familiar with this equipment.
>
>Please reply off-list:
>
>kb4cvn [at] yahoo [.com]
>
>Thank you in advance,
>Mark C. KB4CVN
>Monroe, VA

Mark, saying "I am hoping to find someone with a 192.8 Hz reed
for a 70's vintage Moto radio" is almost like saying "I am hoping
to find someone with a manual for a 70's vintage GE radio."

We need either:

1) Model number of the radio, and if it is encode or decode... It makes
a difference - some radios used different reeds for encode vs decode

OR

2) The part number on the side of the reed (something like TLN6824, KLN6209,
or TU-333)

Mike WA6ILQ 





 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Repeater-Builder/

<*> To unsubscribe from this group, send an email to:
    [EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 


Reply via email to