Hi Mr. Paul, Thank you very much for this info it is really a BIG help,but i have one last question, i just want to clarify about the computation for the Transmitter board, if it is only Fc/24? I am just thinking that you might have missed something in the formula coz in the Receiver formula it is Fc-10.7Mhz/9.
Our club appreciates it very much. Once again, thank you. jay --- In [email protected], "pm3349714" <[EMAIL PROTECTED]> wrote: > > > Hi Jay, The formula for the RXER is Fc-10.7Mhz/9,The TXER is Fc/24 > > Hope this helps, > Paul Maggiore AA3VI > > > > > > > > > > --- In [email protected], "Jay Sario" <[EMAIL PROTECTED]> > wrote: > > > > Hello Eric, > > > > Thanks for the reply, actually i just need the part or page where > it > > shows how to compute the crystal frequency for both boards coz i > > have some crystals which i made be able to use it. I was able to > > download a copy of the VHF version at the repeater-builder site , > > but it doesnt have the same computation for the UHF band. > > > > Thanks again. > > > > jay > > > > > > > > --- In [email protected], "Eric Lemmon" > <[EMAIL PROTECTED]> > > wrote: > > > > > > Jay, > > > > > > Go the Maggiore "Hi-Pro" Web site at > > http://www.hiprorepeaters.com/ and use > > > the contact links to request the manuals you need. They are > > available at a > > > reasonable cost. > > > > > > 73, Eric Lemmon WB6FLY > > > > > > > > > -----Original Message----- > > > From: [email protected] > > > [mailto:[EMAIL PROTECTED] On Behalf Of Jay Sario > > > Sent: Monday, January 02, 2006 9:23 PM > > > To: [email protected] > > > Subject: [Repeater-Builder] Hi-Pro repeater > > > > > > Hello to Everyone, > > > > > > Does anybody have a copy of operating or maintenance manual for > Hi- > > Pro > > > receiver board model R4U and transmitter board EU1. Your help > > would be > > > greatly appreciated. Thank you. > > > > > > Jay > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Yahoo! Groups Links > > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
