You should buy one. You will use this cable when you program your Pacific Research controller also. There is a small circuit board populated in the com port connector. It's not just connecting the right wires. There are some aftermarket ones on Ebay sometimes.
73, Al ----- Original Message ----- From: "splitech" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Saturday, January 07, 2006 1:43 PM Subject: [Repeater-Builder] Vertex 5000 > Hello, I have a vertex 5000 repeater, i have a pac-res controller > coming in the next week, But i need to re-program the vertex > controller. I don't want to pay for a programming cable, But i would > like to make one.. > > I have the pinouts for the controller > > 1. SP (-) > 2. SP (+) > 3. N.C. > 4. MIC > 5. GRND > 6. 9+v > 7. CL.SW (not sure what this is) > 8. CL.DATA (not sure what this is) > > > Also, looking to find out, what wires go to what on the db9 cable.. > > Those are > > 1. Data Carrier Detect > 2. Received Data > 3. Transmitted Data > 4. Data Terminal Ready > 5. Signal Ground > 6. Data Set Ready > 7. Request to Send > 8. Clear to Send > 9. Ring INdicator (wont be using this one) > > > > > > > > > > > Yahoo! Groups Links > > > > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
