If this is a digital station (CXB or RLB), you can get
almost everything from the MRTI connector: PTT input,
audio input, audio output, monitor (PL decode defeat).
The only mystery signals are COR and PL detect. I got
those on the TTRC connector(s) which probably feed the
DB25 connector(s) on the side of the station.
You can program the station as a base station, and if
you choose your PTT priority qualifiers properly, the
rest of the controller will stay out of your way.
Remember to include the local mike as a PTT source,
leave REPEATER out, and include MRTI. Don't enter a
callsign in the repeater ID field and it won't ID. Set
the timeout timers to zero.
If it's a CLB (EPROM-programmed) station, then I can't
help you.
Bob M.
======
--- "Andrew G." <[EMAIL PROTECTED]> wrote:
> I remember seeing somewhere that pin J3-6 (test
> point 7) had direct COR output? Unless this is only
> on digital stations. Where exactly did you get the
> ptt & audio points?
>
> Andy KC2GOW
__________________________________________
Yahoo! DSL Something to write home about.
Just $16.99/mo. or less.
dsl.yahoo.com
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
