Hi Scott,
Some early production 30w and 50w Mitreks had PA spurious problems
when operating much lower than rated output.
If you're using the original control cable connector on the radio to
feed your controller signals in/out, check closely the connector
between the Interconnect board and the Main board inside the radio.
I've had these connectors go south and do all kinds of strange and
unpredictable things.
I am a great fan of the Mitrek - been using a converted 100w UHF
mobile in repeater service here for almost 2 years running 50w into
the duplexer with no problems whatsoever except for the above
mentioned connector several months ago. Cleaning the connector solved
the problem.
Anyway, good luck and I'm sure you'll find the problem........
- Darrell/KA7BTV
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
