N9WYS wrote:
>Well, the last VHF Micor I looked at had the preselector in a different
>location... Or maybe it was an "SP" run.
>
>If so, I stand corrected.
>
I have never seen a VHF or UHF Micor receiver without the helical
preselector attached directly to the board. In the case of the VHF, the
RF-I-F board becomes very mechanically unstable without the attachment
of the casting. If you have seen otherwise, I'd like to see a picture
of it or know what equipment model it is in.
Any Micor receiver will work in the Spectra TAC receiver chassis,
regardless of it coming from a Station, Mobile, or even what band it's on...
Kevin
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
