|
The
ones I have seen in the past were low current draw with an operating voltage in
the ttl level range (at or near 5 v).
It
takes a lot of discharge to bring a 12 volt battery with anything more than
minimal a plate area from 12.52 volts (minimum voltage for a battery at
"idle" before needing re-charge) to below 5 volts. The 12.52V figure will
be challenged, and likely isn't pertinent today; merely given as the benchmark
that Johnson Controls and Sears Automotive Training used in their presentations
about lead-acid batteries of the early 1980s.
I'm
not saying that it isn't possible for someone to find a way not to get it to
work... Murphy is a Full-Time employee and is ACLU Compliant - Never
discriminates.
A few
weeks of very cloudy weather, inefficient solar panel(s), bad cell(s) in the
battery, etc. could deeply discharge a battery. anything is
possible.
There
are no free lunches, and there is no 1 to 1 mechanical advantage. However,
if your repeater eats light, and Mother Nature cooperates, this design is
reported to work.
FWIW,
David
KD4NUE
|
Title: Message
- RE: [Repeater-Builder] Solar-Wind Powered Repeaters Dakota Summerhawk
- Re: [Repeater-Builder] Solar-Wind Powered Repeaters Dick
- RE: [Repeater-Builder] Solar-Wind Powered Repea... dalite01
- Re: [Repeater-Builder] Solar-Wind Powered Repea... rrath
- [Repeater-Builder] Re: Solar-Wind Powered Repeaters skipp025
- Re: [Repeater-Builder] Solar-Wind Powered Repeaters Q
- RE: [Repeater-Builder] Solar-Wind Powered Repeaters Chris Catotti

