Joe, I always found that the G6, and G7 had high desense when used in a FDX application. Also, the overall thin aluminum design of these things keeps me from putting them on a tower where I can't easily get to them. Lastly, the radials on my G7 never seemed to stay in one spot (the ends of them crushed down over time under the mounting plate). The cheapest thing I have used on my 2 meter repeater stuff now is a Diamond that was silver soldered at every joint. James Joe wrote: I was not the person looking for the coil, just made a comment about the Hustler antenna.Just wondering, what didn't you like about it? I used a Hustler for 2 and 220Mhz with good results years ago. Recently, I bought a couple of G7-144 and were not happy with them. 73, Joe, k1ike At 08:43 PM 3/2/2006 -0500, you wrote:I have a complete G7 that I just pulled from back-up service. Never was really happy with the way it worked. If you are local to CT area, email me direct. James WJ1D Yahoo! Groups LinksYahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/ YAHOO! GROUPS LINKS
|
- Re: [Repeater-Builder] G6 144b coil James
- Re: [Repeater-Builder] G6 144b coil Lee Williams
- RE: Re: [Repeater-Builder] G6 144b coil Kevin Custer
- RE: Re: [Repeater-Builder] G6 144b coil k1ike_mail