OK, thanks for the input, Bob. I actually measured the cable I have, and it measures about 7 1/4" overall... So 6 would have been a bit short.
I'm wondering just how critical the shielding is on this particular cable? I have multi-conductor cable available, but it is unshielded. Mark - N9WYS -----Original Message----- From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of Bob M. Sent: Monday, March 06, 2006 10:54 AM To: [email protected] Subject: RE: [Repeater-Builder] Cable You should make the cable 11-12 inches long, like the manual says. I made mine 6 inches before looking at the manual or the chassis - way too short. Now I have to take it all apart and do it all over again. #22 or #24 stranded wire is fine. Bob M. Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
