Skipp, Thanks for the response. I'd like to pick your brain on this. I havejust finished a GE MastrII Exec VHF conversion and I've been in the comm field for 30 years so I have some experience (just to let you know I'm not a novice)
Yes, the cavities are external, they are a 4 can Sinclair I got a response from another guy who had the manual on his site and was just now able to download it. So now I have to read it to figure out how it should work But just to get me going I'd like to ask you the following I turned the unit on and get lights. I was not able to get any audio from it. The busy light came on when I adjusted the squelch. I'm not sure what freq it is on and since I didn't have the pinout for the mike socket I was not able to key it up and measure the freq. ( I now have the pinout and will try to transmit tomorrow) The molex on the back has no mating plug in it, according to your email it should have one to make it work or give out audio. Which pins do I jumper? I took the top cover off and saw a flat 4 pin connector flush with the top of the front panel and to the left of center, what is it? What quick checks can I do? It looks like pin 8 on the molex is PTT, how is the pin numbered? What does the controller look like and where in the radio would it be located? Would it be needed if an external ham controller was used like one from NHRC? If it has been removed would the unit still repeat? Thanks for your offer to help BTW I'm in Miami John -- John Mc Hugh, K4AG Coordinator for Amateur Radio National Hurricane Center, WX4NHC Home page:- http://www.wx4nhc.org Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
