Eric, Looks like T[IorL]X1555A stamped in the lower left corner of the backplane.
Also found TRD1803BB and TLN8747A? stamped on receiver frame on back right side. Power Suppy has TPN1110B on it. Here are two overall images of front and back ... http://www.rickster.org/pics/front.jpg http://www.rickster.org/pic/back.jpg The flying leads in the back are connected to a phone patch unit that will be removed. The system is currently working as a 'plain-jane' repeater on 147.300 - 147.900 with a Wacom WP-641 duplexer Things are a wee bit slow around here this AM ... my T1 wireless went down overnight and the backup dial-up connection sucks dead gerbils! Thanks for the help guys! 73, Rick AE7RS On 3/17/2006 8:33:06 PM, Eric Lemmon ([EMAIL PROTECTED]) wrote: > Rick, > > Offhand, it looks like a 60 watt, intermittent duty base station. If it > were a repeater station, there should be shield plates covering the > receiver. It might also be a paging station. > > Look for any numbers stamped in black ink along the edges of the > backplane > and on the power supply or on any sheet metal parts. Any string of three > letters and four digits, usually starting with "T", are important. Also > look for any tag or label with a number of the form C53RTB3106A (the > letters > and numbers may be different) which is the model number. Some overall > photos of the front and back will help a lot. > > 73, Eric Lemmon WB6FLY Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
