Try a 2.4GHz wireless video sender, with coffee can antennas.
On 3/19/06, Gary Pearce KN4AQ <[EMAIL PROTECTED]> wrote:
>
> If you have line-of-sight, maybe infra-red (or laser was already suggested).
>
> 73,
> Gary KN4AQ
>
> At 07:45 PM 3/19/2006, you wrote:
> >Hi,
> >Here's the deal. I have two sites...Site one is where my 440 hub
> >repeater is located. Site two is where I'm planning to put a 220
> >repeater. The distance between the two is about 20-30 yds.
> >I need to find a way to link the two together. Doing it on 440 is out
> >for several reasons. I could use 900 with a couple of GTX900s or
> >similiar but that seems to be a total waste not to mention would cost
> >$250-$300. Seems like there should be an alternative to spending that
> >kind of money. I also need this to work without attracting a lot of
> >attention, ie...putting up antennas outside. The radios would need to
> >be able to do CTCSS or DCS.
> >
> >Someone suggested using telemetry radios. Anyone have any experience
> >with those? Someone else said I might be able to do it with hts on low
> >power. I have been thinking about 1.2 GHz but can't locate anything
> >that would work.
> >
> >Your suggestions?
> >
> >Thanks
> >Mike K4IJ
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >Yahoo! Groups Links
> >
> >
> >
> >
>
> __________________________________________________________________________
> Gary Pearce KN4AQ staff writer, SERA Repeater Journal
> Cary, NC www.sera.org
> 919-380-9944 [EMAIL PROTECTED]
> [EMAIL PROTECTED]
> AIM: KN4AQ Radio. Yahoo: KN4AQ
> (send e-mail to be put on my "buddy list")
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
