Here is another Idea, If you can get your hands on a couple old Microwave motion detectors mostly found on automatic doors of buildings that are being torn down, or from auto door repair centers. They are perfect trancievers FM and all at about 10 GIG or so.
I have played with these before and it's easy to make work at that range. AC0Y --- In [email protected], "k4ij" <[EMAIL PROTECTED]> wrote: > > Hi, > Here's the deal. I have two sites...Site one is where my 440 hub > repeater is located. Site two is where I'm planning to put a 220 > repeater. The distance between the two is about 20-30 yds. > I need to find a way to link the two together. Doing it on 440 is out > for several reasons. I could use 900 with a couple of GTX900s or > similiar but that seems to be a total waste not to mention would cost > $250-$300. Seems like there should be an alternative to spending that > kind of money. I also need this to work without attracting a lot of > attention, ie...putting up antennas outside. The radios would need to > be able to do CTCSS or DCS. > > Someone suggested using telemetry radios. Anyone have any experience > with those? Someone else said I might be able to do it with hts on low > power. I have been thinking about 1.2 GHz but can't locate anything > that would work. > > Your suggestions? > > Thanks > Mike K4IJ > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
