Re: [Repeater-Builder] Vertex VXR-5000

[Doug Zastrow]

Mike & Terry,
 
That RB web page pretty well covers it.  And 
it nicely details the Pin 13 advantage of being able to revert to 
stand-alone repeater operation when the DB-25 cable to the controller is 
unplugged.
 
Doug
 

  ----- Original Message ----- 
  From: 
  Mike Morris 
  
  To: Repeater-Builder@yahoogroups.com 
  
  Sent: Thursday, March 23, 2006 11:30 
  PM
  Subject: Re: [Repeater-Builder] Vertex 
  VXR-5000
  At 04:18 PM 03/23/06, you wrote:
  Terry, I've interfaced a Link Com Club Deluxe II 
    to our Vertex VXR-5000.  It did not require any rewiring except for the 
    verification of a Yaesu factory mod.  All interfacing was done via the 
    DB-25 connector on the bottom panel. One nice benefit of interfacing via the 
    accessory connector is the VXR-5000 will revert to a stand-alone repeater 
    when the DB-25 is unplugged if configured properly. (Details omitted for 
    brevity.) If 
    you're interested in my notes please mail me off list at dzastrow -at- qwest 
    -dot- net. And 
    yes, our VXR-5000 does not include a factory 
  ID'er.If you have anything to add to the 
  procedure at < 
  http://www.repeater-builder.com/yaesu-vertex-standard/vx-5000-repeater-mods.html 
  > please let me know. That web page was put together from an  exchange 
  on this list over 18 months ago.Mike WA6ILQ














  




  
  
  YAHOO! GROUPS LINKS



   Visit your group "Repeater-Builder" on the web. 
   To unsubscribe from this group, send an email to: [EMAIL PROTECTED] 
   Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.