Jeff, Pull the cabling harnesses out, and throw it in the dishwasher.. I used to do that with old Collins gear when I worked in radio repair. You just gotta be careful how much dishwashing detergent you use... not fun when all the resistor bands disappear! Do it right and it will come out looking new. This is a prime example from last summer... <http://65.173.252.47/auction_pix/30L_1.htm> A guy in Oklahoma paid 900 bucks for the thing!!
Folks would be surprised at some of the methods we used on the old AN-VRC series radios. You can't do that with the plastic gear today... Seems that was a lifetime ago... dem wuz da daze!!! 73 Mike K5JMP www.k5jmp.us -----Original Message----- From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] Behalf Of vmckever Sent: Sunday, March 26, 2006 7:44 PM To: Repeater-Builder@yahoogroups.com Subject: Re: [Repeater-Builder] Mouse-tr II chassis - free Jeff, Sounds like a good piece for recycling. You should be able to get a couple of bucks from the metal recycle guys. Vincent N6OA ----- Original Message ----- From: "Jeff DePolo" <[EMAIL PROTECTED]> To: <Repeater-Builder@yahoogroups.com> Sent: Sunday, March 26, 2006 5:58 PM Subject: [Repeater-Builder] Mouse-tr II chassis - free > > I have a Mastr II chassis that apparently a group of mice were living in > without permission and without paying rent (is there such a thing as a > mouse crack house?). Anyway, if anyone wants it, let me know before > before 10 PM EST tonight else it goes out for the morning trash. It's > just the chassis, backplane, door, harness, speaker, etc., no PA, no > cards in the shelf, no exciter, no receiver, no system board, no lid. > And it's anything but clean. > > --- Jeff > > > > > > > > Yahoo! Groups Links > > > > > Yahoo! Groups Links Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
