We did that back in the sixties ... soap and water in the kitchen sink - drying in the oven.
Neil - WA6KLA ---- Original Message ---- From: [EMAIL PROTECTED] To: [email protected] Subject: RE: [Repeater-Builder] Mouse-tr II chassis - free Date: Sun, 26 Mar 2006 20:05:21 -0500 >Jeff, >Pull the cabling harnesses out, and throw it in the dishwasher.. I >used to >do that with old Collins gear when I worked in radio repair. You >just gotta >be careful how much dishwashing detergent you use... not fun when >all the >resistor bands disappear! Do it right and it will come out looking >new. >This is a prime example from last summer... ><http://65.173.252.47/auction_pix/30L_1.htm> >A guy in Oklahoma paid 900 bucks for the thing!! > >Folks would be surprised at some of the methods we used on the old >AN-VRC >series radios. > >You can't do that with the plastic gear today... >Seems that was a lifetime ago... dem wuz da daze!!! > >73 >Mike >K5JMP >www.k5jmp.us > > >-----Original Message----- >From: [email protected] >[mailto:[EMAIL PROTECTED] Behalf Of vmckever >Sent: Sunday, March 26, 2006 7:44 PM >To: [email protected] >Subject: Re: [Repeater-Builder] Mouse-tr II chassis - free > > >Jeff, Sounds like a good piece for recycling. You should be able to >get a >couple of bucks from the metal recycle guys. > >Vincent N6OA >----- Original Message ----- >From: "Jeff DePolo" <[EMAIL PROTECTED]> >To: <[email protected]> >Sent: Sunday, March 26, 2006 5:58 PM >Subject: [Repeater-Builder] Mouse-tr II chassis - free > > >> >> I have a Mastr II chassis that apparently a group of mice were >living in >> without permission and without paying rent (is there such a thing >as a >> mouse crack house?). Anyway, if anyone wants it, let me know >before >> before 10 PM EST tonight else it goes out for the morning trash. >It's >> just the chassis, backplane, door, harness, speaker, etc., no PA, >no >> cards in the shelf, no exciter, no receiver, no system board, no >lid. >> And it's anything but clean. >> >> --- Jeff >> >> >> >> >> >> >> >> Yahoo! Groups Links >> >> >> >> >> > > > > > > >Yahoo! Groups Links > > > > > > > > > > > > > >Yahoo! Groups Links > > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
