--- In [email protected], "N9WYS" <[EMAIL PROTECTED]> wrote: > No,I not change the frequencies for the ham band. What I do not understand, when I push the ptt button, the repeater transmit ok? And he passes on with the good frequency! I do not find why he does not want to pass on by himself. I verify switches and that seem correct. That seems to be a problem of reception. Or I do not make thing Correctly. I do not know any more what to make. And I not changed the original frequency.cannot be a problem Of VCO or of the duplexer. Thank you for your help
> Jacques, > > Did you change the frequency into the ham band? If so, the VCO may need to > be changed to allow the new frequency to operate. Also, you probably need > to re-tune the duplexer if it came with one. Both of the R-100's I have > came with mobile-type duplexers attached to the cover. > > What frequency was originally in it and what frequency did you program into > it? > > Mark - N9WYS > > -----Original Message----- > From: [email protected] > [mailto:[EMAIL PROTECTED] On Behalf Of jerrepotable > Sent: Wednesday, April 12, 2006 3:24 PM > To: [email protected] > Subject: [Repeater-Builder] motorola r-100 problem > > Hello, I have Motorola r-100. > The problem, the repeater is programmed and he does not want Worked? I > do not know this repeater a lot. > I program it and he is ineffective. I look for a trick to put on him > thank you > jacques > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
