Hello to the group.
I am building a 3 channel voting system for a local repeater group
and I was wondering what the rest of the world is using as a
interface for the voting reciever/transmitter package. How are you
configuring your pl? I have built up some MVPs and that part was a
slam dunk. I have purchased an ICS Basic that I have installed in one
of the MVPs but I am not getting the results I was hoping for. It
does not seem to pass the pl as I thought it would. I have the de-
emphasis cap pulled, and I am feeding the CG Hi line on the exciter,
(don't have a cow, I am going to use a limiter before I install the
package) ;-) but the audio seems to sound a bit funny, and it doesn't
want to pass the pl properly as it is intermittent at best. I know
that many use nothing more than an audio interface with a cos to ptt
linkup but I wanted some control over these things as well as an
ID'er if they are going to be 75 miles away so I opted for a
controller.
So, the question is, what are you folks using? What say ye?
Thanks in advance.
John ab6li
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
