> "us_communications1" <[EMAIL PROTECTED]> wrote: > Good Afternoon Gentlemen,
just the above scares half of us away... > I am looking to build a hi-fi quality audio repeater to > feed audio for remote broadcasts of a non-commercial radio > station which has been greatly annoying, "greatly annoying"..? You, the remote broadcasts or the fact that you're on a non commercial radio station? > as I need a specific IF filter for a motorola receiver > a tu-540w and I have been unable to find the filter. You probably won't find a plug and play or drop in replacement filter. But you need to be more specific... do you want to do standard voice remotes as in typical short traffic reports? ... or do you want to do extended voice broadcasts with possible other source material added in. The former is easily done with standard wideband fm radios, the other is more often done with wide bandwidths. > In addition, the chief engineer for the station has been > completely un-helpful. It's probably not something he's been required to do in past. And he may not be honestly interested in doing one now. > While I am not an amateur radio operator, I am building this > repeater for amateur radio use on the 144-148 mc band and the > engineer of the station claims he has an amateur radio license, > but i am beginning to have my doubts and the engineer has not > been supportive of building a hi-fi audio repeater. As wacky as your post reads, I'd also probably have doubts about helping you with a hi-fi audio repeater. "Hi-Fi" and "repeater" don't normally get used in the same sentence. You haven't been clear about what type of material (content) to be sent through this magic box. > how can i confirm if the engineer has a amateur radio > license? www.qrz.com Would an Amateur License be required to build a repeater? I wouldn't think so, although it would be handy. > is there a listing of engineers and what licenses they have? God I hope not... and no I don't think so. > i went through a lot of trouble to find the older tube > type equipment to build this hi-fi quality audio repeater > and want to make it work to serve the non-commercial fm > station. In the 144-148 MHz band? Tube type equipment you think will have better audio than some of the newer stuff? Some of the group readers are falling back over in their chairs reading what you're trying to do... and how you're going about it. > what suppliers carry older motorola radio parts? No suppliers really, but there are at least 12 full size battleship loads of surplus NOS Motorola Parts, which have not yet made it to the recycler or landfill. You're going to have to do some flea markets (Like the Dayton Hamvention) and a lot of searching around. When you come back down to the real world, ask companies like Comm-Spec if they have anything close in their crystal filter retrofit kits. Otherwise it's not that hard to make filters. Life goes on... skipp Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/