On Thu, 11 May 2006 20:25:17 -0400, Eric Vincent wrote:
>I tried to put a gnd on CG Disable on J910 and work like a Phoenix!
Great!
>For manual and programming, I know what you think about that...
Ya...sorry about that. You still may want to look around
for a Phoenix-SX manual, as that will give you all of
the information about signalling and the RF sections.
>If anybody have hints about programming TMX-1000, let me know.
I normally don't do this (as it's very time consuming), but if
you want a couple frequencies programmed, tell me the TX and RX
frequencies, what CG tones you want, and whether you want STE
(Squelch Tail Elimination) or CCT (Carrier Control Timer, or TOT).
I'll program up a 2816 and read it with my Pocket Programmer II
and send you the BIN file. All you will have to do is find any
type of EPROM programmer and burn your own.
PLEASE don't send me a list of 99 channels (the TMX1000 will
hold 99 conventional channel). Limit it to 4 or 5.
Tedd Doda, VE3TJD
Lazer Audio and Electronics
Baden, Ontario, Canada
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
