> I am using a mitrek exciter at 1 watt to drive a Micor TLD1693D amp. > I have tuned it up and it is working great in the 147.xxx range. I > get approx 75 watts at 25 amps draw or so and 110 at 30 amps. I don't > have a Micor base/repeater manual, so I am wondering what current the > Motorola supplied power supply is good for?
You're hitting it too hard. The VHF Micor PA is designed for about 400-700 mW input, give or take. One solution would be to put a 3dB pad in series. -- Jim Barbour WD8CHL Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/