Oh, I forget, the service manual for the 9841 is available for download off the EF Johnson site..
http://www.efjohnson.com/PDF/manuals/98xxGenericServMan.pdf -73, Pete N2MCI --- In [email protected], "n2mci" <[EMAIL PROTECTED]> wrote: > > There are at least another 2 other types of plugs as well as > the 2 Skipp listed.. A round Plug used on the EFJ 96xx series > and a flat square pin type.. The round pin also uses a couple > extra pins for programming firmware.. > > The number of plugs used on the portables seams to be endless. > > The cable I use to prg. up my EFJ's is a Kenwood 6 pin Mobile > (max232 design) with a adapter that converts signal pins to the > proper EFJ Pin locations.. Here's a list of where each of the > pins are for each type of radio.. > > http://home.hvc.rr.com/n2mci/txt/kw2efj.txt > > The 8 pin plug used on the EFJ 86xx series and 98xx series is > a special 8 pin RJ-12 which isn't avilable any where.. A RJ-45 > will work, but you need to file about .035" off of each side.. > It's not critical as the latch centers the plug.. > > P.S. Let's hope for nice weather in Dayton again this year.. > > -73, Pete N2MCI > > --- In [email protected], "skipp025" <skipp025@> wrote: > > > > There are two EF Johnson rib or programming interfaces. One is > > the mic jack/telco style unit with software. This unti works > > with the mass built 800 and 900 trunking radios. > > > > The second works for the Challenger Series Radios and fits > > onto a pc board edge on the rear of the radio. > > > > I'm looking for the Challenger (and probably works with other > > models using the edge connector) Programming Interface cable/rib > > and would pay more than fair money to find one. I'll also be > > grinding on EFJ at IWCE because no one seems to return phone > > calls or emails in the last two months... what's up with that? > > > > Please Email me direct if you have one you'd like to part with. > > > > Hope to see many of you at IWCE and Dayton this week. > > > > cheers, > > skipp > > > > skipp025 at yahoo.com > > > > > "Maire-Radios" <maire-radios@> wrote: > > > > > > This was a radio made my EF Johnson needs there rib to program it > > and it is > > > not front panel programming. Also it does LTR. I have about of > > the 9841 > > > unit nib I would love to sell. > > > > > > John > > > > > > > > > > > > ----- Original Message ----- > > > From: "Jim B." <jdb@> > > > To: <[email protected]> > > > Sent: Tuesday, May 16, 2006 9:19 AM > > > Subject: Re: [Repeater-Builder] Before you run off to Dayton: a > > quick query > > > re: EF Johnson 9842 mobile > > > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
