I am sending this again as it never showed up here reflected from the group.
-------- Original Message -------- Subject: Re: [Repeater-Builder] CTCSS encoder Date: Thu, 25 May 2006 09:18:21 -0500 From: Jim Brown <[EMAIL PROTECTED]> To: [email protected] References: <[EMAIL PROTECTED]> <[EMAIL PROTECTED]> <[EMAIL PROTECTED]> <[EMAIL PROTECTED]> I found my problem. I was just getting a couple of horizontal lines of the file when I did finally get it downloaded, including the copy that was sent via the list. I have been using Adobe Reader 5 and it reads the other Com Spec files all OK. I upgraded to Adobe Reader 6 and my problems went away. I guess that when the SS-64 file was encoded it used features in Ver 6 that the other files did not use. In any case - I am all set, and my encoder is identified. Thanks again to the list - 73 - Jim W5ZIT >At 07:06 PM 05/24/06, you wrote: > > >>>I took a look at the SS-64 on line and sure enough, my unit matches that >>>picture. For some reason I can't download the PDF file from Com Spec - >>>it is blocked by both Netscape and IE. I can get the TS-64 all OK, but >>>not the SS-64. >> >> > >Try the copy here: ><http://www.repeater-builder.com/com-spec/com-spec-index.html> > > > >>>I would guess the encode switches for selecting the tone are the same as >>>a TS-64. >> >> > >If not, they are on the sheet. > >(rest deleted for brevity) > >Mike WA6ILQ > > > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
