Jim, it did show up in the reflector. I rcvd it FB. 73,
Dick ----- Original Message ----- From: "Jim Brown" <[EMAIL PROTECTED]> To: <[email protected]> Sent: 25 May, 2006 08:10 Subject: [Fwd: Re: [Repeater-Builder] CTCSS encoder] >I am sending this again as it never showed up here reflected from the >group. > > -------- Original Message -------- > Subject: Re: [Repeater-Builder] CTCSS encoder > Date: Thu, 25 May 2006 09:18:21 -0500 > From: Jim Brown <[EMAIL PROTECTED]> > To: [email protected] > References: <[EMAIL PROTECTED]> > <[EMAIL PROTECTED]> <[EMAIL PROTECTED]> > <[EMAIL PROTECTED]> > > > > I found my problem. I was just getting a couple of horizontal lines of > the file when I did finally get it downloaded, including the copy that > was sent via the list. I have been using Adobe Reader 5 and it reads > the other Com Spec files all OK. I upgraded to Adobe Reader 6 and my > problems went away. I guess that when the SS-64 file was encoded it > used features in Ver 6 that the other files did not use. > > In any case - I am all set, and my encoder is identified. > > Thanks again to the list - > > 73 - Jim W5ZIT > >>At 07:06 PM 05/24/06, you wrote: >> >> >>>>I took a look at the SS-64 on line and sure enough, my unit matches that >>>>picture. For some reason I can't download the PDF file from Com Spec - >>>>it is blocked by both Netscape and IE. I can get the TS-64 all OK, but >>>>not the SS-64. >>> >>> >> >>Try the copy here: >><http://www.repeater-builder.com/com-spec/com-spec-index.html> >> >> >> >>>>I would guess the encode switches for selecting the tone are the same as >>>>a TS-64. >>> >>> >> >>If not, they are on the sheet. >> >>(rest deleted for brevity) >> >>Mike WA6ILQ >> >> >> >> >> >> >> > > > > > > > Yahoo! Groups Links > > > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
