--- In [email protected], "Jim B." <[EMAIL PROTECTED]> wrote:
>
> National Emergency Assistance Radio Team Headquters wrote:
> > Date :05-29-2006
> > Time :8:00 PM CST
> >>From :Lige Turner
> > Repeter-Builder
> > I,m Am A GMRS Radio Operater
> > And I Would Like More On How
> > To Build A UHF-FM Land Mobile
> > Radio(LMR)Repeter That Will Put
> > Out 100 Watts ERP Output And Would
> > Work On The Input Frequency 462.675 Mhz
> > CTCSS Tones 141.3 Hz And Output Frequency
> > 467.675 Mhz With A CTCSS Tone 141.3 Hz
>
> This is virtually unreadable, but what I can read is there are
several
> legal errors. The input frequency will be 467.xxx and the output
will be
> 462.xxx. Also you cannot run more then 50 watts out of the
transmitter.
> These are both set in Part 95 of the FCC rules. I suggest you get
a copy
> from the FCC website. It is downloadable.
>
> --
> Jim Barbour
> WD8CHL
> KAE9169
>
Jim and others are correct about the above. Also, the original
poster needs to be aware that group licenses are no longer available
(since 1988 I think) unless he has a grandfather'd one and if so, he
may not perform any changes to his system. He'd do best getting a
Part 90 license.
Bob, GMRS WPVV845, Amateur KG4WAD, LMRS WPXC892
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/